How do I suspend a sink plan?

These furniture without grip on the ground, want to be both light, aerial, design, modern and practical. They have multiple advantages because they release from the ground surface. It is also easy to install furniture. Find out how to suspend a sink plan.

Bringing together all necessary equipment

To install a basin, the very first step to be taken is to assemble all the materials necessary for its fixation. Among other things, you will need screws and ankles adapted to the support.
You should also have a flat or cruciform screwdriver. Then you must have a hammer, a metre, a pencil, a small square, a bubble level, a glue and a glue gun.

Preparing the project

After gathering all the tools necessary to lay the basin plan, you need to ask yourself some questions. How many basins do you want to install: one or two? What shape and dimensions for basins? Which materials and accessories do you want to prefer? What about the taps? ...
To properly prepare the site, you also need to choose the location and wall that will accommodate your basin plan. If possible, opt for a support that does not shelter piping or electrical circuit.

Pre-mount suspended furniture

If your basin plan is not pre-assembled, you must arrange for the installation and assembly of its various components. This step is quite easy to complete, since it is sufficient to follow the manufacturer's instructions in the package leaflet to obtain a satisfactory rendering.

Mark places of attachment

After the pre-assembly, it is necessary to mark the places where the fastening systems and suspended furniture will be placed. Here, the ideal height is between 85 and 90 cm, but the European standard recommends a height of 83 cm from the ground to the bondage.
In any case, using the bubble level and the pencil you have to position the fastening legs and the hanging basin.

Permanently fix the hanging basin and secure connections

Finally, the final steps are the final fixing and connections. Reduce the lower edges of your silicone glue bowl and position the whole properly. Take your hands off only after a few minutes to let the glue work, then make the last binding touches.
For connections, you need to connect hoses to water arrivals. Then you need to connect the siphon to the hanging cabinet evacuation system.